Pagina 1 van 1

Uitlijn gegevens mustang 65

Geplaatst: vr 30 aug, 2013 19:18
door niels84
Me mustang moet nog uitgelijnd worden maak ik heb geen gegevens

Heeft iemand deze liefst in graden

Re: Uitlijn gegevens mustang 65

Geplaatst: vr 30 aug, 2013 19:20
door Ghost Rider
. , ? :roll:

Re: Uitlijn gegevens mustang 65

Geplaatst: vr 30 aug, 2013 19:28
door 1967coupe
Caster
If the Mustang is equipped with a six-cylinder engine, the caster is within 0 to +2 degrees. A caster angle of +1 is optimum. If the car is equipped with an eight-cylinder engine, caster is within -1 and +1 degrees. A caster angle of 0 is optimum.

Camber
The camber angle is the same, regardless of the type of engine. Camber is between -1/4 and +1-1/4 degrees. The optimum camber angle is +1/2 degrees.

Toe-in
The toe-in specification is the same, regardless of the type of engine. The toe-in on a 1965 Mustang is 7/32 of an inch.


Toe-out
If the Mustang is equipped with a six-cylinder engine, toe-out at the outer wheel is 19-1/8 degrees if equipped with manual steering and 20-1/8 degrees if equipped with power steering. If the Mustang is equipped with an eight-cylinder engine, toe-out at the outer wheel is 18-7/8 degrees. Toe-out at the inner wheel is the same, regardless of the type of engine, at 20 degrees.

Re: Uitlijn gegevens mustang 65

Geplaatst: zo 01 dec, 2013 12:16
door RonNL
Alle uitlijn gegevens voor diverse jaren Mustangs.

http://www.mustangmonthly.com/techartic ... alignment/